Art Deco Brick Water Tower

A 47-block-tall Art Deco water tower featuring fluted wool walls, an industrial brick crown, and a central access ladder.

Art Deco Brick Water Tower
Download schematicView in 3DFree .schematic file on 9Minecraft Schematics · works with WorldEdit and Litematica

What you are building

Standing at a towering 47 blocks high, this industrial water tower brings early twentieth-century elegance to your world. Its octagonal silhouette features subtle recessed fluting along the main shaft, capped with a rich red brick observation drum and a floating circular roof ring that gives the structure a distinctive Art Deco silhouette.

This build fits seamlessly inside a vintage city skyline, an industrial factory district, or on a raised hill overlooking a bustling railway depot. Whether used as a functional water reservoir, a radar station, or a sniper tower for survival defense, it provides both utilitarian presence and architectural style.

Because the primary walls are made of wool, keep flint and steel, campfires, and lightning rods well away from the tower to prevent catastrophic fire spread.

The spacious interior core between layers 10 and 30 is hollow—ideal for concealing automated item elevators, potion brewing setups, or bulk water bucket storage.

Materials 4,477 blocks · 23 types

  • Light Gray Wool1,32520 stacks + 45
  • White Wool1,30820 stacks + 28
  • Glass3205 stacks
  • Oak Leaves2323 stacks + 40
  • Torch2313 stacks + 39
  • Bricks2273 stacks + 35
  • Grass Block1472 stacks + 19
  • Cobblestone1462 stacks + 18
  • Stone1031 stack + 39
  • Ladder821 stack + 18
  • Glass Pane721 stack + 8
  • Dirt681 stack + 4
  • Stone Slab661 stack + 2
  • Oak Slab48
  • Grass38
  • Oak Stairs18
  • Oak Log14
  • Sandstone12
  • Oak Wall Sign10
  • Smooth Stone4
  • Poppy2
  • Sandstone Stairs2
  • Dandelion2

Block palette

The exterior relies heavily on White Wool and Light Gray Wool to create clean vertical grooves with subtle shading, contrasted boldly against a vibrant Bricks upper collar. Cobblestone and stone anchor the foundation to the ground.

If wool feels too flammable or tricky to mass-produce, you can easily swap the white and gray wool for White Concrete and Light Gray Concrete, or smooth quartz and diorite for a glossy, blast-resistant modern finish.

Lay the stone foundation and lower shaft

Layers 1–7 of 47

Start by clearing a 27 by 18 plot and laying down the cobblestone ground apron with stone steps. Map out the octagonal perimeter of the tower base using stone and light gray blocks.

Begin building the fluted exterior up through layer 7 using White Wool and Light Gray Wool, setting back the center panels slightly to create the signature vertical recessed detailing. Frame the entrance at ground level with dark oak or logs.

Art Deco Brick Water Tower - step 1: Lay the stone foundation and lower shaft

Extend the fluted shaft upward

Layers 8–20 of 47

Continue pulling the fluted wool walls straight up to layer 20, carefully preserving the recessed channels along each face. Keep the corners sharp and uniform.

Inside the core, build a central stone pillar fitted with a vertical Ladder and light each intermediate landing with torches to maintain easy access as the height increases.

Art Deco Brick Water Tower - step 2: Extend the fluted shaft upward

Transition into the brick upper drum

Layers 21–34 of 47

Carry the wool shaft upward through layer 34 until the main white column reaches its final height. Lay an interior floor across the top of the white shaft to form the base of the upper chamber.

Switch materials to Bricks and begin raising the upper water tank drum. Leave vertical three-block-tall window slits along the flat faces for observation openings.

Art Deco Brick Water Tower - step 3: Transition into the brick upper drum

Cap the observation level and roof ring

Layers 35–47 of 47

Complete the brick drum to full height and trim the perimeter edge with a crisp ring of White Wool. Install glass panes in the window slits and place torches around the interior core.

Finally, construct the elevated circular roof slab disk floating one block above the rim, lining its outer edge with torches to cast light down across the upper facade at night.

Art Deco Brick Water Tower - step 4: Cap the observation level and roof ring

Finishing touches

Surround the base cobblestone yard with patches of Oak Leaves, grass tufts, and gravel pathways leading toward nearby factory warehouses. For added realism, run an iron bar or gray concrete pipe down the back wall to represent the tower's primary water intake main.

Frequently Asked Questions

Can I fill the top brick drum with real water?

Yes. As long as you seal the window slits with glass blocks or panes, you can fill the inner reservoir completely with water source blocks to serve as an actual functional water tower.

How do I safely reach the top in survival mode?

The central hollow stone shaft houses a ladder line running from the ground floor straight up through the observation deck, making it fully climbable without scaffolding.

#industrial#tower#art deco#brick#city

Download schematicView in 3DFree .schematic file on 9Minecraft Schematics · works with WorldEdit and Litematica

You May Also Like